SOLD.
2000 SV650 race bike. **SOLD** Raced with the EMRA from 2007-2012 at Stratotech Racepark, Racecity Calagary and at Mission. Ohlins rear shock....
I do still have the SV and it even has new tires on it! I really wanted to go to Castrol this past year but it didn't happen for various reasons....
Looks like Black 15 has been given away. I guess that's my own fault for not racing in three years. Maybe it's a sign.
I know this sounds funny but I weighed a few of my bikes, including my race bike, on a roadside truck scale (I used the one on Hwy 28 on my way...
I have a Rollei Actioncam. I comes with a lot of accessories and it was on sale for $150 CAN from Chain Reaction Cycles in the UK. I just...
Nice! I might have to come out from Vancouver Island this Summer.
You will feel like you are racing through the forest.....actually you are. It's not all open area like most tracks and it has elevation changes.
Axle nuts must be lockwired unless secured by a cotter pin or hitch pin (R-Clips have to be tied or wired closed). Swingarm spool sliders are...
That is definitely a 1996 and up model. Here are a couple of links that explain more about the ZX-7 & ZX-7R. This one is just an eBay...
Pre 1996 ZX-7R bikes are rare (as the standard model was just called the ZX-7). The 91-92 (K model) ZX-7R is different from the 93-94 (M model)...
Having raced on split grids with multiple classes for years, I don't see a problem with it as long as there isn't a huge disparity in power...
Whats the plan for out of towners not going to the banquet? I just ordered a shirt.....probably should have asked that first. :)
***sold***
I sold the rains a while ago. Glad I could help Rick. Once your SV is running smooth you will enjoy it more.
Rick: I checked my supply of spare main jets. I have 150 and 155 mains but no 152.5s. I think the spare 152.5s I had are residing in another SV.
I don't have my SV carb notes handy, but I am pretty sure the needle clip goes on the third one down with one spacer on top. The factory Pro and...
A very common set up for the Gen 1 SV carbs is a BMC or K&N air filter (with the wide top opening), 152.5 main jets (up from stock 137.5), 17.5...
Can you not use rubber automotive fuel line material with the same inner diameter available at auto stores and just cut it to length? I have...
From my Gen 1 SV combustion related Experience: FUEL: I ran my Gen 1 SV at Stratotech and Mission without making any jetting changes. The stock...
Separate names with a comma.
