FOR SALE: 2014 Ninja 300 racebike

Discussion in 'Buy and Sell' started by RT70, Jan 28, 2020.

  1. RT70

    RT70 New Member

    Joined:
    Jan 28, 2020
    Messages:
    3
    Likes Received:
    0
    Real Name:
    Rob
    Buy my race bike!

    Decked out 2014 Ninja 300 now up for sale. Bike is located in Vancouver.
    • Makes just under 39.5HP
    • Lots of weight reduction
    • Fully safety wired and race prepped

    Bike was raced from new in 2015 and part of 2016 by the first owner, and by me in 2018/2019. Clean Canadian title. Thoroughly maintained. I have dyno sheets, maintenance records, and suspension spec sheets.

    Build List:
    • Armour Bodies Race bodywork
    • Racing windshield
    • Woodcraft clipons
    • Woodcraft brake/clutch lever guards
    • Pazzo short folding levers
    • MotionPro Rev2 quick turn throttle
    • Woodcraft rearsets
    • Braided steel front brake line
    • EBC Pro-Lite XC floating front rotor
    • Arashi lightweight rear rotor
    • Vesrah RJL-ZZ high performance race pads
    • Pirelli Superbike SC-1 slicks
    • Spears front/rear wheel spacer kits
    • EK415R chain
    • 415 sprockets (currently 57/17)
    • Spears Shift Kit Steel Bearing
    • Spears heavy duty shift detent spring
    • EBC SRK race clutch kit (springs and friction plates)
    • K-Tech 20IDS forks
    • Penske fully adjustable shock with remote reservoir
    • SKF fork seals
    • Muzzy full race exhaust
    • K&N air filter
    • Power Commander V
    • Power Commander Auto tune
    • Dynapro Quick Shifter
    • Spears smog (AIS) blockoff plate
    • PCV tuning and ECU flash by Mas Dyno
    • Stompgrip tank grips
    • Woodcraft frame sliders
    • Woodcraft spools
    • R&G engine case covers
    • Spears lightweight no-drill sharkfin
    • Full Spectrum Pulse 2 lightweight (1lb) battery
    • Woodcraft key elimination harness (entire ignition column removed)
    • Kill switch and starter replacement
    • Driven lightweight keyless gas cap
    • Titanium brake front/rear rotor bolts
    • Titanium/Aluminum front fender bolts
    • Aluminum/Nylon mudguard and chainguard bolts
    • R&G lightweight exhaust bracket with rear brake res. Holder
    • Titanium exhaust mount bolt
    • Titanium/Aluminum shock reservoir mount bolts/nuts
    • Select aluminum engine cover bolts
    • Extensive weight reduction (took off another 12.75lbs for 2019)
    Extras:
    • Extra OEM gas tank
    • Extra OEM front fairing stay
    • Extra Muzzy slip-on
    • Extra windshield
    • Service manual
    • OEM front/rear brake rotors
    • A bunch of spare OEM parts
    New work done for 2019:
    • Basically went cover to cover through the service manual (short of splitting the crankcase), with help from Burnaby Kawasaki
    • Forks/shock rebuilt and tuned by SuspensionWerx
    • Front brake caliper freshly rebuilt
    • Front master cylinder freshly rebuilt
    • New steel braided front brake line
    • All cooling hoses replaced with new
    • New front/rear wheel bearings
    • New 415 chain
    • New spark plugs

    Going for $6500 OBO
    Give a shout if you have any questions

    _RN10605-(ZF-4935-86121-1-003)-small.jpg IMG_20200114_210724-01-small.jpg IMG_20200114_210840-01-small.jpg IMG_20200114_210903-01-small.jpg IMG_20200114_210920-01-small.jpg IMG_20200114_210929-01-small.jpg IMG_20200114_211024-01-small.jpg IMG_20200114_211048-01-small.jpg IMG_20200114_211141-01-small.jpg IMG_20200114_211626-01-small.jpg
     

Share This Page